Abnormal grain growth; A Spontaneous activation of competing grain rotation

Liss, K.-D.*; Xu, P. G.; Shiro, Ayumi*; Zhang, S. Y.*; Yukutake, Eitaro*; Shobu, Takahisa; Akita, Koichi*

Advanced Engineering Materials, 9 Pages, 2023/00

https://onlinelibrary.wiley.com/doi/10.1002/adem.202300470

A Study on stress measurement of weld part using double exposure method

Suzuki, Kenji*; Kura, Komoe*; Miura, Yasufumi*; Shiro, Ayumi*; Toyokawa, Hidenori*; Saji, Choji*; Kajiwara, Kentaro*; Shobu, Takahisa

Zairyo, 71(12), p.1005 - 1012, 2022/12

https://doi.org/10.2472/jsms.71.1005

This paper describes a stress measurement from a welded part of an austenitic stainless steel using synchrotron X-rays. Difficulty measuring the X-ray stress of the welded part is caused by the broadening of the diffraction spot in the radial and circumferential directions. The bending strains of the rectangular bar made of the welded part were measured using synchrotron white X-rays and the double exposure method. To improve the energy resolution, monochromatic synchrotron X-ray of 70 keV was used. The diffraction pattern showed the sharp arc like a pattern from texture material. The diffraction profile was obtained from the integral of the diffraction intensity in the direction of the circumference. The diffraction angle was determined using the double exposure method. As a result, the distribution of the residual stresses of the welded part could be measured.

Structure and properties of amorphous magnesium carbonate, a key material for geological storage of carbon dioxide

Kyono, Atsushi*; Yamamoto, Genichiro*; Yoneda, Yasuhiro; Okada, Satoru*

Isotope News, (783), p.23 - 27, 2022/10

Mineral traps are attracting attention as an underground storage method for carbon dioxide. Carbon dioxide laden groundwater reacts with basalt to form magnesite. The formed magnesium carbonate phase varies in many ways, but we tried to clarify the structure because all of them pass through amorphous magnesium carbonate. Pair distribution function using high-energy X-ray diffraction revealed that amorphous magnesium carbonate has a structure similar to that of hydromagnesite. It can be said that it is a safe sequestration method as a carbon dioxide storage technology.

Stress measurements of quasi-coarse grained material using double exposure method with high-energy monochromatic X-rays

Suzuki, Kenji*; Yamada, Minami*; Shiro, Ayumi*; Shobu, Takahisa; Toyokawa, Hidenori*; Saji, Choji*

Zairyo, 71(4), p.347 - 353, 2022/04

https://doi.org/10.2472/jsms.71.347

We have already succeeded in the residual stress of aluminum alloys using the double exposure method (DEM) with 30 keV synchrotron radiation X-rays. However, the DEM has not be applied in the range of high-energy synchrotron X-rays. In this study, the stress measurements of a shrink-fitted ring using the DEM with synchrotron monochromatic X-rays beyond about 70 keV were performed. A CdTe pixel detector and a CCD camera were used as a detector. The shrink-fitted specimen of SUS304 was quasi-coarse grains of 43 micro-meters, and the diffraction rings were spotty. Despite quasi-coarse grains, it was possible to measure the stresses of the shrink-fitted specimen using the DEM. As a result, the DEM is excellent method to measures the stress for coarse grained materials. In addition, it is better to make the length between the detection positions longer to improve precision of the DEM. On the other hand, it was ineffective to increase the positions of detection.

synchrotron radiation observation of deformation and annealing processes of aluminum single crystal

Shiro, Ayumi*; Okada, Tatsuya*; Shobu, Takahisa

Mechanical Engineering Journal (Internet), 8(6), p.21-00106_1 - 21-00106_8, 2021/12

https://doi.org/10.1299/mej.21-00106

The objective of the present study was to carry out observations of deformation and annealing processes of aluminum single crystals using a synchrotron radiation X-rays at SPring-8. Al single-crystalline samples having a 111 orientation parallel to the longitudinal direction were grown by a Bridgman method. The samples were deformed in tension to a nominal strain of 0.08 at room temperature using an in-line tensioning apparatus. Post-deformation annealing at 480 C was subsequently carried out in the same apparatus. A two-dimensional detector was used to detect multiple diffracted beams from the sample during the deformation and annealing processes. The volume irradiated by the X-ray beam was found to be composed of three regions having a small orientation difference, which was attributable to sub-grained microstructures of the sample. Detailed analyses of a diffraction spot intensity showed that the sub-grained microstructures were surpassed by dislocated microstructures with the increase in the tensile strain. During the post-deformation annealing, diffraction spots from a recrystallized grain first appeared at 180 s after the temperature reached 480 C. Coexistence of diffraction spots from the deformation matrix and recrystallized grain lasted only for about 22 s in the irradiated volume. The migration rate of the boundary between the deformation matrix and recrystallized grain was estimated to be of the order of several micrometers/s.

Effects of residual stress and plastic strain on hydrogen embrittlement of a stretch-formed TRIP-aided martensitic steel sheet

Hojo, Tomohiko*; Akiyama, Eiji*; Saito, Hiroyuki*; Shiro, Ayumi*; Yasuda, Ryo*; Shobu, Takahisa; Kinugasa, Junichiro*; Yuse, Fumio*

Corrosion Science, 177, p.108957_1 - 108957_9, 2020/12

https://doi.org/10.1016/j.corsci.2020.108957

Hydrogen assisted cracking on hemispherically-stretch-formed specimens of transformation induced plasticity-aided martensitic steel was investigated. Hydrogen charging induced cracking around the foot of the impression formed on the steel sheet, and the cracks propagated along the radial direction toward the hillside and the plains. Distributions of stress, plastic strain and volume fraction of retained austenite were analyzed employing the energy-dispersive X-ray diffraction method utilizing the synchrotron X-ray radiation at SPring-8. It was notable that the crack initiation took place in the region where the measured tensile stress was the highest. Influences of plastic strain and resulted martensitic transformation were also suggested.

Hydrogen embrittlement resistance of pre-strained ultra-high-strength low alloy TRIP-aided steel

Hojo, Tomohiko*; Kumai, B.*; Koyama, Motomichi*; Akiyama, Eiji*; Waki, Hiroyuki*; Saito, Hiroyuki*; Shiro, Ayumi*; Yasuda, Ryo*; Shobu, Takahisa; Nagasawa, Akihiko*

International Journal of Fracture, 224(2), p.253 - 260, 2020/08

https://doi.org/10.1007/s10704-020-00451-5

In the study, the pre-strain effect on hydrogen embrittlement property of the ultra-high-strength transformation-induced plasticity -aided bainitic ferrite steel was investigated towards application for automobile frame parts. 3-10% tensile pre-strain suppressed hydrogen-induced mechanical degradation relative to total elongation while 12-15% pre-strained specimen did not exhibit elongation after hydrogen charging. The advantageous effect of the 3-10% pre-strain was attributed to the suppression of crack initiation related to retained austenite. The TRIP by pre-straining decreased the volume fraction of retained austenite before hydrogen charging, thereby reducing existing probabilities of preferential crack initiation sites and propagation paths. Conversely, high pre-strain such as 12-15% does not effectively work due to work hardening resulting in increases in hydrogen embrittlement susceptibility and a significant increase in hydrogen content due to the multiplication of dislocations.

Stress measurement of coarse grains using double exposure method

Suzuki, Kenji*; Shobu, Takahisa; Shiro, Ayumi*

Zairyo, 68(4), p.312 - 317, 2019/04

https://doi.org/10.2472/jsms.68.312

Materials after thermal processing such as welding often have coarse grains. To understand the residual stress after processing is very important from the viewpoint of the soundness of the structure. In this study, we proposed a double exposure method that combines a two-dimensional detector and high-energy synchrotron radiation as an X-ray stress measurement method for materials with coarse grains, and confirmed its practicality. As a result of measuring the residual stress of the plastic bending specimen and the indentation specimen of the aluminum alloy (A5052), the effectiveness of this measurement method was clarified because the residual stress distribution was in good agreement with the finite element analysis.

Strain measurement in Ti layers of CFRP/Ti laminates by synchrotron X-ray diffraction

Akita, Koichi; Nakatani, Hayato*; Ogihara, Shinji*; Shobu, Takahisa; Shiro, Ayumi*; Igawa, Naoki; Shimojo, Yutaka

SPring-8/SACLA Riyo Kenkyu Seikashu (Internet), 6(1), p.105 - 108, 2018/01

http://doi.org/10.18957/rr.6.1.105

no abstracts in English

Local deformation analysis in martensite layer of high-strength multilayered steel composite using synchrotron X-ray diffraction

Ojima, Mayumi*; Shiro, Ayumi*; Suzuki, Hiroshi; Inoue, Junya*; Shobu, Takahisa; Xu, P. G.; Akita, Koichi; Nambu, Shoichi*; Koseki, Toshihiko*

Zairyo, 66(6), p.420 - 426, 2017/06

https://doi.org/10.2472/jsms.66.420